Autobianchi
Autobianchi (pronounced [α.utobi'ɔnki]—IPA pronunciation) was an Italian automobile manufacturer, created jointly by Bianchi, Pirelli and Fiat in 1955. Autobianchi produced only a handful of models during its lifetime, which were almost exclusively small cars, with the biggest being the short-lived Autobianchi A111, a small family car. Autobianchis were priced higher than Fiat models of similar size and the brand was used by Fiat to test new and innovative concepts which later found their way into mainstream Fiat vehicles; these concepts included fibreglass bodies and front-wheel drive.
The most famous Autobianchi models include the A112 released in 1969, a small hatchback very popular in Italy for racing, and which ceased production in 1986; as well as the Y10, which was the first car to use Fiat's new FIRE (Fully Integrated Robotised Engine). The Primula was the car with which Fiat introduced the particular front-wheel drive arrangement of engine, transmission and differential (final drive) that has become prevalent in its cars today. This car competed with the Innocenti-built Mini, which was the inspiration for the drivetrain layout.
Autobianchi was bought by the Fiat group and integrated into the operations of Lancia. The marque survived in Italy until the end of the Y10's production in 1995, but became extinct elsewhere when the model was rebranded as a Lancia in 1989.
Origins
Bianchi, founded by Edoardo Bianchi in 1885 and now remembered primarily as a bicycle manufacturer, was also active in passenger car manufacturer from 1899. Bianchis were in general high-end luxury cars, made with high attention to detail. The company's factory in Abruzzi was destroyed by bombing during World War II. Edoardo Bianchi himself died in 1946 in a car accident, and the ownership of the firm passed to his son, Giuseppe. Even though a new, modern facility was constructed in Desio after the war, economic conditions forced Giuseppe not to resume passenger car production, but rather to focus on bicycles, motorcycles and commercial vehicles.
Bianchi's general manager, Ferruccio Quintavalle, wanted to take advantage of the company's extensive experience in manufacturing cars and ordered the preparation of studies and prototypes of possible new models. Soon it became apparent that resuming passenger car production would not be feasible without a help of stronger partner. Therefore, Bianchi turned to large industrial groups Fiat and Pirelli with a proposal to form a new company to produce automobiles. Thus, the Autobianchi company was born, with the agreement signed by the three parties on 11 January 1955 and share capital of 3 million lira, 33% of which belonged to the Bianchi family. A new, modern, purpose-built plant for the production of Autobianchi cars was erected on an area of 140,000 square metres in Desio.
Each of the partners had a clearly defined role and interest in the venture. Fiat was to provide the technical base and components for the assembly of the cars. It was seeking to capture the premium niche of the small car market, at that time occupied by coachbuilders such as Moretti and Vignale, who were building their models on Fiat chassis. Pirelli, which was to supply tires for the cars, sought to expand their OEM market share. Bianchi, was assigned the duties of preparing the bodies and assembling complete vehicles; a step towards their desired return to full passenger car production.
Bianchina
Main article Bianchina
The first car to be produced by the new company was the Bianchina, whose name was a tribute to Edoardo Bianchi's first 1899 car. The Bianchina was based on Fiat 500 mechanicals – with its two-cylinder, air cooled engine mounted in the rear – but featured a completely new stylish body designed by Luigi Rapi, who was in charge of Fiat's special body unit and helped to set up production in Desio. With many premium design and equipment features, the Bianchina emerged as an upscale minicar, slotting above the Fiat 500 in the market. Marketed as a "second vehicle in the household", and a luxurious "recreational vehicle", also being targeted at affluent middle-class women, it mirrored the increasing affluence in Italian society.
The first Bianchina rolled from the production lines in Desio on 11 September 1957 and had the unusual body style of a two-door landaulet, called "Trasformabile". It remained the sole body style until 1960, when a two-door "Cabriolet" was introduced, followed by a three-door estate version, the "Panoramica" and a two-door saloon, the "Berlina". Finally, two van versions were launched: one resembling a two-seater version of the Panoramica, and another, with a raised and expanded cargo section.
Stellina and Primula – Autobianchi pioneers new concepts
Main articles Stellina, Primula
Five years after the debut of the Bianchina, at the 1963 Turin Motor Show, a completely new Autobianchi model debuted: the Autobianchi Stellina. A two-door barchetta based on the Fiat 600D's chassis was distinguished by its fibreglass body, designed by Tom Tjaarda. It was Italy's first car with such a body. The vehicle was only produced for two years (1964 and 1965) and only 502 Stellinas were made. Nevertheless, the model was an important step in the development of new technology for Fiat and the rest of the automotive industry. Its lofty price-tag of almost a million lira further emphasized the elevated status of the Autobianchi brand within the Fiat empire.
Even more important was the following year's presentation, the Autobianchi Primula. It was Fiat's first attempt at a front-wheel drive car with a transverse engine, a configuration popularized by the British Mini and allowing for very compact and efficient utilization of the body space. Designed by Fiat's technical director, Dante Giacosa, it was launched under the Autobianchi brand to test market reaction to the new concept. The Primula's particular configuration of front wheel drive with a transverse engine, but with a gearbox on the end of the engine and unequal length drive shafts, rather than a gearbox in the sump like the Mini, became universal; as did its use of conventional steel suspension in almost all other cars with the exception of Citroen- usually McPherson struts at the front and a "dead" rear axle. Indeed Peugeot in facelifting their 305 range on the early 1980s switched from their former adherence to the Mini in-sump gearbox to the Primula's end-on gearbox configuration. The Primula is thus a car design of far greater significance than is often realised, as its design influence spread far beyond even the mainstream high volume Fiats such as the 127 and the 128 of the late 1960s. Even though the new Autobianchi was priced higher than Fiat models of similar size, the car met with a favorable reception. Fiat would gradually move all of its models to front-wheel drive.
Into the 1970s
Facing a crisis in the motorcycle market, Bianchi was forced to sell its share in Autobianchi and the company was finally fully integrated into Fiat SpA in 1968. 1969 marked many important developments for the marque. First of all, Bianchina production is finally stopped. Moreover, Autobianchi was positioned within the Fiat Group under the control of the newly-acquired luxury marque Lancia. And significantly, two new Autobianchi models were launched this year: the Autobianchi A111 and Autobianchi A112. Those names sound perhaps a bit uninspired compared to previous Autobianchis, and do not have much to do with any particular technical characteristic or size. They were basically internal Fiat development codes, used as model names in a fashion similar to Fiat-branded vehicles of that era.
The A111 was derived from Primula mechanicals, but much bigger and more spacious, marking the first (and only) entry of the brand into the small family car class. As usual, it was priced higher than similar Fiat models, notably the first front-wheel drive Fiat per se, the Fiat 128, and did not much find much favour with customers. After little more than 50,000 A111s were made, the plug was pulled as early as in 1972.
The A112 was much more successful. A modern, front-wheel drive supermini it was in many ways similar to the Innocenti Mini, which gained substantial popularity in Italy, following on from the popularity of the original Mini throughout Europe. Similarly, the A112 saw strong demand and built a loyal following, reinforced by the introduction of Abarth sporting versions and Autobianchi's engagement in racing with modified versions of the model.
With Primula production ceasing in 1970 and the quick demise of the A111, Autobianchi became effectively a one-model brand. Consequently, the A112 was marketed as a Lancia from the mid-1970s in most markets, except for Italy and France, where it retained the Autobianchi branding until the end of production.
End of the road
The A112 continued for a remarkable 17 years, with frequent but rarely insubstantial changes. After over 1,250,000 of those small cars were built, they were finally replaced in 1986 by a new model, the Autobianchi Y10, based mechanically on the Fiat Panda. This car was branded as Lancia from the beginning for most export markets (except for France again, until 1989), thus becoming better known as the "Lancia Y10". It retained Autobianchi badging and branding in Italy alone. The Desio plant was finally closed in 1992 and with the Y10 being replaced by the Lancia Ypsilon (branded as Lancia in all markets including Italy), the Autobianchi brand disappeared altogether in 1996.
The rights to the brand are now held by the Registro Autobianchi, the official club of the marque in Italy.
External links
| Models - Bianchina | Stellina | Primula | A111 | A112 | Y10 Founding partners - Bianchi | Fiat | Pirelli | ||||
| Parent brand - Lancia A brand of the Fiat group | ||||
| Car Information and Photos by Marque: A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z |
| Motorcycle Information and Photos by Marque: A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z |